AC 0105
Dispersions for water-based elastic coatings
【 Product Overview 】
This product is a resin specially developed for water-based exterior wall elastic emulsion paint system. It is a polyacrylate lotion synthesized from a variety of acrylate and special monomers. It has good low-temperature film forming performance, excellent tensile strength, and good elongation at break. It is especially recommended for outdoor elastic coating resins. Has good cost-effectiveness among similar products.
【Physical and chemical properties】
Summary | Special monomer modified polyacrylate lotion |
Exterior | Milk white liquid, without mechanical impurities, etc |
PH value | ≥5.5 |
Active ingredients | 48±2% |
Tg (℃) (calculated value) | -17 |
Specific gravity (g/ml, 25 ℃) | 1.1±0.1 |
【Application advantages 】
1、This copolymer has good storage stability, excellent film-forming performance, and low foaming performance, making it suitable for various applications such as building exterior wall elastic paint;
2、Good low-temperature film-forming performance and low water absorption rate;
3、Not using alkylphenols for surface activity, etc;
4、Good stain resistance performance;
5、Excellent low-temperature elongation;
【 Usage suggestions】
Specially recommended for resin used in outdoor elastic coatings;
Suggested dosage (wt%, calculated based on the total formula):>45%;
Follow the conventional process:
Do not come into contact with cations, multivalent metal ions, or other destabilizing substances during storage
【 Packaging and storage 】
50, 150, 1000 kg/barrel;
Sealed after use；
Place in a cool environment with a temperature of 5-35 ℃, away from direct sunlight and avoid exposure to sunlight.
AC 0113
Dispersions for water-based coatings
【 Product Overview 】
This product is a resin specially developed for water-based stone like paint and sand in water base paint system. It is a polyacrylate lotion synthesized from a variety of acrylates and special monomers. It has good film forming performance, excellent water whitening resistance, and UV yellowing resistance. It is especially recommended for outdoor weather resistant coatings. Has good cost-effectiveness among similar products.
【Physical and chemical properties】
Summary | Special monomer modified polyacrylate lotion |
Exterior | Milk white liquid, without mechanical impurities, etc |
PH value | ≥5.5 |
Active ingredients | 43±2% |
Tg (℃) (calculated value) | 15 |
Specific gravity (g/ml, 25 ℃) | 1.1±0.1 |
【Application advantages】
1、This copolymer has good storage stability, excellent film-forming performance, and low foaming performance, making it suitable for use in real stone paint, water in sand latex paint, and other applications. It can also be used in water-based wood paint for indoor facade decoration;
2、Good dry film transparency and low water absorption rate;
3、Do not use free alkylphenols for surface activity, etc;
4、Excellent water resistance performance;
5、Excellent weather resistance such as high temperature yellowing resistance and UV resistance;
【 Usage suggestions 】
Specially recommended for outdoor weather resistant coatings such as real stone paint and water-based sand base paint;
Suggested dosage (wt%, calculated based on the total amount of formula): according to customer formula requirements
Follow the conventional process:
Do not come into contact with cations, multivalent metal ions, or other destabilizing substances during storage
【 Packaging and storage 】
50, 150, 1000 kg/barrel;
After use, it should be sealed;
Place in a cool environment with a temperature of 5-35 ℃, away from direct sunlight and avoid exposure to sunlight.
AC 0114
Dispersions for aqueous multicolored continuous phase
【 Product Overview 】
This product is a resin specially developed for water-borne multicolor continuous phase system. It is a polyacrylate lotion synthesized from a variety of acrylates and special monomers. It has good film forming performance, excellent water whitening resistance, UV yellowing resistance, and good protective adhesive resistance.
【Physical and chemical properties 】
Summary | Special monomer modified polyacrylate lotion |
Exterior | Lotion like, no mechanical impurities, etc |
PH value | ≥5.5 |
Active ingredients | 35±2.0% |
Tg (℃) (calculated value) | 27 |
Specific gravity (g/ml, 25 ℃) | 1.1±0.1 |
【Application advantages 】
1、This copolymer has good storage stability, excellent film-forming performance, low foaming performance, and is suitable for applications such as colorful continuous coatings. It can also be used for water-based wood paint for indoor facade decoration;
2、Good stability performance of protective adhesive;
3、Not using alkylphenols for surface activity, etc;
4、Good water resistance performance;
5、Excellent anti yellowing (UV resistance) performance;
【 Usage suggestions 】
Specially recommended for continuous outdoor weather resistant coatings such as water in water, water in sand, etc;
Follow the conventional process:
Do not come into contact with cations, multivalent metal ions, or other destabilizing substances during storage
【 Packaging and storage 】
50, 150, 1000 kg/barrel;
After use, it should be sealed;
Place in a cool environment with a temperature of 5-35 ℃, away from direct sunlight and avoid exposure to sunlight.
AC 0115
Dispersions for water-based surface coatings
【 Product Overview 】
This product is a resin specially developed for water-based finishing paint system. It is a polyacrylate lotion synthesized from a variety of acrylates and special monomers. It has good film forming performance, excellent water whitening resistance, and UV yellowing resistance. It is especially recommended for outdoor weather resistant coatings. Has good cost-effectiveness among similar products.
【Physical and chemical properties】
Summary | Special monomer modified polyacrylate lotion |
Exterior | Milk white liquid, without mechanical impurities, etc |
PH value | ≥5.5 |
Active ingredients | 32±2% |
Tg (℃) (calculated value) | 29 |
Specific gravity (g/ml, 25 ℃) | 1.1±0.1 |
【Application advantages】
1、This copolymer has good storage stability, excellent film-forming performance, low foaming performance, and is suitable for various applications such as building exterior wall coatings. It can also be used as a water-based wood paint for indoor facade decoration;
2、Good dry film transparency and low water absorption rate;
3、Not using alkylphenols for surface activity, etc;
4、Good water resistance performance;
5、Excellent anti yellowing (UV resistance) performance;
【 Usage suggestions 】
Specially recommended for outdoor weather resistant coatings on water in water, water in sand and other coverings;
Suggested dosage (wt%, based on the total amount of formula): 75-90%
Follow the conventional process:
Do not come into contact with cations, multivalent metal ions, or other destabilizing substances during storage
【 Packaging and storage 】
50, 150, 1000 kg/barrel;
After use, it should be sealed;
Place in a cool environment with a temperature of 5-35 ℃, away from direct sunlight and avoid exposure to sunlight.
AC 0116
Dispersions for water-based surface coatings
【 Product Overview 】
This product is a resin specially developed for water-based finishing paint system. It is a polyacrylate lotion synthesized from a variety of acrylates and special monomers. It has good film forming performance, excellent water whitening resistance, UV yellowing resistance, and good stain resistance. It is especially recommended for outdoor weather resistant coatings. Has good cost-effectiveness among similar products.
【Physical and chemical properties】
Summary | Special monomer modified polyacrylate lotion |
Exterior | Milk white liquid, without mechanical impurities, etc |
PH value | ≥5.5 |
Active ingredients | 32±2% |
Tg (℃) (calculated value) | 17 |
Specific gravity (g/ml, 25 ℃) | 1.1±0.1 |
【Application advantages 】
1、This copolymer has good storage stability, excellent film-forming performance, low foaming performance, and is suitable for various applications such as building exterior wall coatings. It can also be used as a water-based wood paint for indoor facade decoration;
2、By introducing special macromolecular modified monomers, the coating's stain resistance was improved while minimizing the impact on water resistance;
3、Not using alkylphenols for surface activity, etc;
4、Good water resistance performance;
5、Excellent anti yellowing (UV resistance) performance;
【 Usage suggestions 】
Specially recommended for outdoor weather resistant coatings on water in water, water in sand and other coverings;
Suggested dosage (wt%, based on the total amount of formula): 75-90%
Follow the conventional process:
Do not come into contact with cations, multivalent metal ions, or other destabilizing substances during storage
【Packaging and storage 】
50, 150, 1000 kg/barrel;
After use, it should be sealed;
Place in a cool environment with a temperature of 5-35 ℃, away from direct sunlight and avoid exposure to sunlight.
AC 0117
Dispersions for water-based surface coatings
【 Product Overview 】
This product is a resin specially developed for water-based finishing paint system. It is a polyacrylate lotion synthesized from a variety of acrylates and special monomers. It has good film forming performance, excellent water whitening resistance, UV yellowing resistance, and good stain resistance. It is especially recommended for outdoor weather resistant coatings. Has good cost-effectiveness among similar products.
【Physical and chemical properties】
Summary | Special monomer modified polyacrylate lotion |
Exterior | Milk white liquid, without mechanical impurities, etc |
PH value | ≥5.5 |
Active ingredients | 39±1.5% |
Tg (℃) (calculated value) | 17 |
Specific gravity (g/ml, 25 ℃) | 1.1±0.1 |
【Application advantages】
1、This copolymer has good storage stability, excellent film-forming performance, low foaming performance, and is suitable for various applications such as building exterior wall coatings. It can also be used as a water-based wood paint for indoor facade decoration;
2、By introducing special macromolecular modified monomers, the coating's stain resistance was improved while minimizing the impact on water resistance;
3、Not using alkylphenols for surface activity, etc;
4、Good water resistance performance;
5、Excellent anti yellowing (UV resistance) performance;
【 Usage suggestions 】
Specially recommended for outdoor weather resistant coatings on water in water, water in sand and other coverings;
Suggested dosage (wt%, based on the total amount of formula): 75-90%
Follow the conventional process:
Do not come into contact with cations, multivalent metal ions, or other destabilizing substances during storage
【 Packaging and storage】
50, 150, 1000 kg/barrel;
After use, it should be sealed;
Place in a cool environment with a temperature of 5-35 ℃, away from direct sunlight and avoid exposure to sunlight.
AC 0117A
Dispersions for water-based surface coatings
【 Product Overview 】
This product is a resin specially developed for water-based finishing paint system. It is a polyacrylate lotion synthesized from a variety of acrylates and special monomers. It has good film forming performance, excellent water whitening resistance, UV yellowing resistance, and good stain resistance. It is especially recommended for outdoor weather resistant coatings. Has good cost-effectiveness among similar products.
【Physical and chemical properties】
Summary | Special monomer modified polyacrylate lotion |
Exterior | Milk white liquid, without mechanical impurities, etc |
PH value | ≥5.5 |
Active ingredients | 38±1.5% |
Tg (℃) (calculated value) | 17 |
Specific gravity (g/ml, 25 ℃) | 1.1±0.1 |
【Application advantages】
1、This copolymer has good storage stability, excellent film-forming performance, low foaming performance, and is suitable for various applications such as building exterior wall coatings. It can also be used as a water-based wood paint for indoor facade decoration;
2、By introducing special macromolecular modified monomers, the coating's stain resistance was improved while minimizing the impact on water resistance;
3、Not using alkylphenols for surface activity, etc;
4、Good water resistance performance;
5、Excellent anti yellowing (UV resistance) performance;
【 Usage suggestions】
Specially recommended for outdoor weather resistant coatings on water in water, water in sand and other coverings;
Suggested dosage (wt%, based on the total amount of formula): 75-90%
Follow the conventional process:
Do not come into contact with cations, multivalent metal ions, or other destabilizing substances during storage
【 Packaging and storage】
50, 150, 1000 kg/barrel;
After use, it should be sealed;
Place in a cool environment with a temperature of 5-35 ℃, away from direct sunlight and avoid exposure to sunlight.
AY 0131
Dispersions for high-performance interface agents
【 Product Overview】
This product is a cationic resin specially developed for improving adhesion of a variety of substrates. It is a polyacrylate lotion synthesized from a variety of acrylates and special monomers. It has good film forming performance and excellent permeability. It is especially recommended for various old coating substrates that are difficult to adhere and substrates with high sealing performance requirements. Has good cost-effectiveness among similar products.
【Physical and chemical properties 】
Summary | Special monomer modified polyacrylate lotion |
Exterior | Milk white liquid, without mechanical impurities, etc |
PH value | ≤7.5 |
Active ingredients (wt%) | 30±2﹪ |
MFFT（℃） | 5 |
Specific gravity (g/ml, 25 ℃) | 1.05±0.05 |
【Application advantages 】
1、This copolymer has good storage stability, excellent film-forming performance, low foaming performance, and is suitable for various
applications that require special coatings;
2、Good low-temperature film-forming performance and low water absorption rate;
3、Not using alkylphenols for surface activity, etc;
4、Good alkali resistance and excellent water penetration resistance;
5、Excellent adhesion of concrete substrate;
【 Usage suggestions 】
Specially recommended for resin coating on both new and old substrates (primer);
Suggested dosage (wt%, calculated based on the total formula):>45%;
Follow the conventional process:
Do not come into contact with anions or other destabilizing substances during storage
【 Packaging and storage 】
50, 150, 1000 kg/barrel;
After use, it should be sealed;
Placed in a cool environment with a temperature of 5-35 ℃, avoiding direct sunlight and exposure to sunlight, with a shelf life of 9 months.
AX 0579
Dispersions for water-based anti rust coatings
【 Product Overview 】
This product is a kind of resin specially developed for water-based industrial paint system. It is a polyacrylate lotion synthesized from styrene, a variety of acrylates and special monomers. It has good film forming performance, good adhesion to metal surface, good salt spray resistance, and good adaptability to a variety of pigments and fillers. Has good cost-effectiveness among similar products.
【Physical and chemical properties】
Summary | Special monomer modified polyacrylate lotion |
Exterior | Milk white liquid, without mechanical impurities, etc |
PH value | ≥5.5 |
Active ingredients | 47±2% |
Tg (℃) (calculated value) | 32 |
Specific gravity (g/ml, 25 ℃) | 1.1±0.1 |
【Application advantages】
1、This copolymer has good storage stability, excellent film-forming performance, low foaming performance, and good wettability to the substrate; Suitable for metal anti rust primer and other applications;
2、Has good compatibility with various color fillers in the slurry;
3、Not using alkylphenols for surface activity, etc;
4、Good adhesion to metal surfaces (steel plates, tinplate, etc.);
5、Good salt spray resistance;
【 Usage suggestions】
Multiple metal coatings;
Suggested dosage (wt%, based on pigment content): 55-90%
Carry out according to the conventional process: first prepare the pigment slurry, then disperse and blend the lotion and various additives
Do not come into contact with cations, multivalent metal ions, or other destabilizing substances during storage
【 Packaging and storage】
50, 150, 1000 kg/barrel;
After use, it should be sealed;
Place in a cool environment with a temperature of 5-35 ℃, away from direct sunlight and avoid exposure to sunlight.
CA 0828
Dispersions for water-based protective coatings
【 Product Overview】
This product is a kind of resin specially developed for waterborne PP and its derivative industrial paint system. It is a polyacrylate lotion synthesized from a variety of acrylates, special monomers and other raw materials. It is a halogen-free environmental bonding material; The products made with this product have high adhesion, impact resistance, non backsticking, water and alkali resistance, and solvent resistance, truly achieving all the performance requirements of the bottom integrated resin. The compatibility with various additives is excellent, and the selection of thickeners is wide. For high Tg products, the amount of film-forming additives added is only 6%, and the construction is simple and convenient.
【Physical and chemical properties】
Summary | Special monomer modified polyacrylate lotion |
Exterior | Milk white liquid, without mechanical impurities, etc |
PH value | ≥5.5 |
Active ingredients | 45±2% |
Tg (℃) (calculated value) | 45±5 |
Specific gravity (g/ml, 25 ℃) | 1.1±0.1 |
【Application advantages】
1、This copolymer has good storage stability, excellent film-forming performance, low foaming performance, and good wettability to the substrate; Suitable for various substrates such as wood, concrete, fabrics, PP and its derivatives;
2、Has good compatibility with various color fillers in the slurry;
3、Moderate Tg gives it good permeability, adhesion, water resistance, breathability, and weather resistance. It can form a network system between the adhesive layer and the base layer, which can react well with the adhesive material and solve the problem of adhesion;
4、This product fully adopts water-based environmentally friendly production technology, which is environmentally friendly and low-carbon. It is a new type of environmentally friendly building material, characterized by fast construction and low construction costs;
5、Halogen free, this product is non-toxic and harmless, and is an environmentally friendly product;
【 Usage suggestions】
Suggested dosage (wt%, based on total amount): 55-90%
According to the conventional process: first prepare the pigment slurry, then disperse and blend the lotion and various additives;
Do not come into contact with cations, multivalent metal ions, or other destabilizing substances during storage;
Coating usage conditions: After the product is made, it can be dried at 80 ℃ for 40 minutes, or it can be dried naturally;
This product cannot be mixed with other adhesive products for use;
Please pay attention to protecting the skin and eyes when using. If it accidentally enters the eyes, rinse immediately with water and seek medical attention promptly.
【 Packaging and storage 】
50, 150, 1000 kg/barrel;
After use, it should be sealed;
Store in a cool environment with a temperature of 5-35 ℃, away from direct sunlight and avoid exposure to sunlight. The effective storage period is 12 months.
X 0551
Waterborne epoxy dispersion
【 Product Overview】
This product is a water-based epoxy resin dispersion with excellent performance and wide versatility. Through self emulsification, it has excellent water resistance and corrosion resistance. It is the best choice to replace oil-based epoxy in various fields such as quick drying coatings on metal substrates, and has good compatibility with various pigments and fillers.
【Physical and chemical properties】
Summary | Dispersions of epoxy resin, hydrophilic polymers, and water |
Exterior | Uniform lotion, no visible mechanical impurities, etc |
PH (25 ℃, 1% distilled water dispersion) | 7.00±1.5 |
Active ingredients | 50±2% |
Epoxy equivalent g/mol (solid count) | 450-580 |
Dispersibility | Can be dispersed in water |
Specific gravity (25 ℃, g/cm3) | 1.05±0.05 |
【Application advantages】
1、This product has good compatibility with various powders and some water-based resin systems, with minimal side effects;
2、When combined with suitable curing agents, it has good quick drying performance and can complete 2 to multiple layers of coating within 1 day;
3、Through self emulsification, it has excellent water resistance and corrosion resistance, as well as good shear resistance;
4、This product is a non-ionic system and can be used for resin compatibility in various anionic, cationic, and non-ionic systems;
5、Due to its ability to provide faster curing and harder films, this product is particularly suitable as an excellent anti-corrosion primer for various rigid metal surfaces and decorative systems for metal substrates.
【 Usage suggestions 】
It is recommended to stir the powder evenly when adding this product. Alternatively, the powder can be pre dispersed into a slurry and then added to the system. The specific amount and process of addition depend on the specific production formula and process until the desired effect is achieved, but the temperature of the system must be less than 40 ℃;
To ensure the stability of the coating, the additives used should not contain functional groups that can react with epoxy groups;
Curing conditions: substrate temperature>12 ° C, relative humidity<80%;
The curing speed is fast and the applicable period is short. The coating with curing agent added must be used up within the applicable period. The end user should confirm the product's applicable period based on the type of curing agent and construction temperature;
Due to the possibility of water loss and foaming during storage and transportation, some agglomerates may be generated. It is recommended that users filter before use;
Because the production process of this product involves first reaction and then emulsification, the possible decrease in viscosity during storage is a normal phenomenon.
【 Packaging and storage 】
150/1000 kg/pack;
After use, it should be sealed to prevent foreign objects from entering or the loss of effective ingredients. It should be placed in an environment with a temperature of 5-30 ℃, in a dark and cool place, away from light and freezing, etc;
Shelf life:<10 months.
X 0552
Waterborne epoxy dispersion
【 Product Overview 】
This product is a water-based epoxy resin dispersion with excellent performance and wide versatility. It has good adhesion and impact resistance through internal plasticization, and excellent water and corrosion resistance through self emulsification. It is the best choice to replace oil-based epoxy in many fields such as containers and has good compatibility with various pigments and fillers.
【Physical and chemical properties】
Summary | Dispersions of epoxy resin, hydrophilic polymers, and water |
Exterior | Uniform lotion, no visible mechanical impurities, etc |
PH (25 ℃, 1% distilled water dispersion) | 7.00±1.5 |
Active ingredients | 50±2% |
Epoxy equivalent g/mol (solid count) | 450-580 |
Dispersibility | Can be dispersed in water |
Specific gravity (25 ℃, g/cm3) | 1.05±0.05 |
【Application advantages】
1、This product has good compatibility with various powders and some water-based resin systems, with minimal side effects;
2、Having good adhesion and impact resistance through internal plasticization and other means;
3、Through self emulsification, it has excellent water resistance and corrosion resistance, as well as good shear resistance;
4、This product is a non-ionic system and can be used for resin compatibility in various anionic, cationic, and non-ionic systems;
5、Specially suitable as an excellent anti-corrosion primer for various metal surfaces, decorative systems for metal substrates, and various plastic coatings.
【 Usage suggestions 】
It is recommended to stir the powder evenly when adding this product. Alternatively, the powder can be pre dispersed into a slurry and then added to the system. The specific amount and process of addition depend on the specific production formula and process until the desired effect is achieved, but the temperature of the system must be less than 40 ℃;
To ensure the stability of the coating, the additives used should not contain functional groups that can react with epoxy groups;
Curing conditions: substrate temperature>12 ° C, relative humidity<80%;
The coating with added curing agent must be used up within the applicable period, and the end user should confirm the product's applicable period based on the type of curing agent and construction temperature;
Due to the possibility of water loss and foaming during storage and transportation, some agglomerates may be generated. It is recommended that users filter before use;
Because the production process of this product involves first reaction and then emulsification, the possible decrease in viscosity during storage is a normal phenomenon.
【 Packaging and storage 】
150/1000 kg/pack;
After use, it should be sealed to prevent foreign objects from entering or the loss of effective ingredients. It should be placed in an environment with a temperature of 5-35 ℃, in a dark and cool place, away from light and freezing, etc;
Shelf life:<12 months.
NV 0574
Aqueous UV dispersion
【 Product Overview】
This product is a solvent-free, UV cured polyurethane water-based dispersion with excellent performance and wide versatility. It has good low viscosity and leveling performance (after surface drying and before UV curing), and its good low viscosity and leveling performance before UV curing make it particularly suitable for primer coatings on various types of wood, etc. It has good adhesion and impact resistance, and is suitable for various processes such as roller coating or spraying.
【Physical and chemical properties】
Summary | Water dispersions of modified polyurethane acrylic resin |
Exterior | Uniform lotion, no visible mechanical impurities, etc |
PH value | 7.00±1.5 |
Active ingredients | 40±2% |
Viscosity (mPas, 25 ℃) | <1000 |
Dispersibility | Can be dispersed in water |
Specific gravity (25 ℃, g/cm3) | 1.05±0.05 |
【Application advantages】
1、This product has good compatibility with various active diluents and photoinitiator systems, with minimal side effects;
2、Multiple substrates such as wood and plastic have good adhesion and impact resistance;
3、Excellent sealing performance;
4、Excellent UV primer suitable for water-based wood surfaces, water-based UV coatings for various plastic surfaces, etc.
【 Usage suggestions】
Due to the presence of unsaturated bonds such as olefins in this product, it is recommended to ensure that the system temperature is<40 ℃ during use;
To ensure the stability of the coating, the additives used should not contain initiators such as free radicals;
The final performance of coatings formulated with this resin is also affected by other components of the formula (such as active diluents, additives, photoinitiators, etc.), so the compatibility of all formulas must be optimized and confirmed by the process engineer;
Because the production process of this product involves reaction first and then emulsification, the possible decrease in viscosity during storage is a normal phenomenon;
The coating prepared with this product is suitable for various processes such as roller coating or spraying;
This product may experience layering and other phenomena during storage. It is recommended to use it after thorough dispersion before use, as it does not affect the final performance of the product.
【 Packaging and storage 】
50, 150/1000 kg/pack;
The packaging drum must be coated with inner plastic or dark plastic. After use, it should be sealed to prevent foreign objects from entering or the loss of effective ingredients. It should be placed in an environment with a temperature of 5-35 ℃, in a dark and cool place, avoiding light and freezing, etc;
Shelf life:<6 months.
Long Press to Scan QR Code
Scan QR Code
